Boat-Shed

Boat Shed

To list a new advert or to remove an existing advert, please info@v8superboats.com.au

For Sale - Unlimited Engine For Sale

FOR SALE

Unlimited Engine for Sale

Specification

Like-New 2014 Ford Coyote Super Cobra Jet. Selling due to new life priorities, excellent engine, regretful sale. Tuned for Jetsprint racing and limited to 7500rpm but capable of higher.

The engine was sourced, new, from Herrod Performance (https://www.herrodperformance.com.au/) and imported from America. Tuned by MosTech Race Engines and DJR. The engine was designed by Ford for the Mustang Drag Racing team and a limited number was made for general sale.

Displacement & type: 5.0L V8 with twin independent variable cam timing (TiVCT)
Block: Production 5.0L Ti-VCT block
Heads: CNC-ported, 4-valves per cylinder
Induction: Ford Performance Whipple 2.9L Supercharger
Camshafts Custom grind: Ford Performance proprietary
Crankshaft: Forged
Rods: Manley H-beam
Pistons: Mahle forged, Ford Performance spec
Inlet pipe: Ford Performance Cobra Jet
Throttle body: Cobra Jet oval monoblade
Tuned for race quality E85
Roush – Yates aluminium billet dry sump system (same as NASCAR)
Bosch ignition modules
150psi sensors
Lamda to CAN-Dual (LTCD)
Wiring Loom (hand made by Mostec Race Engines)
Currently producing 790 ft/lbs@5300rpm, 950hp@7000rpm
Performed less than 5 hours of run time since last rebuild
Will need a new flywheel if putting into a car as the current one is a light weight and small.

Engine only $42,000

Optional extras:
Motec M190 ECU programmed by DJR and Mostec Race Engines: extra $4500
M1 GPA package
Level 2 Logging

Custom stainless headers and mufflers suited to a tight fit like a boat: extra $2000
Bosch 4.9 Lambda sensors

   $Engine Only $42,000 option for extras

  Jeremy Kincaid

  1st May 2021

For Sale - 2 Obsessed For Sale

FOR SALE

2 Obsessed For Sale

Specification

  • Mackcraft Hull
  • Australian Title winner in 350 class driven by Jeremy Kincaid
  • Australian Title winner in International Group A
  • 8 ½ inch Scott Jet Unit
  • 400 Chev Engine
  • Dart Block
  • Callies Crank and Rods
  • ASR Sump
  • Vacuum Pump
  • Custom Roller Cam
  • Jessel Rockers
  • 680 H/P plus
  • Engine refreshed late 2018
  • New heads, bearings and pistons
  • Standard bore
  • Single axle braked trailer
  • Travel cover

$50, 000 all inclusive or $25,000 less engine

   $50, 000 all inclusive or $25,000 less engine

  Brett Thornton

  25th November 2019

For Sale - World Series and Multiple Australian championship Winning Stinger Hull

SOLD OUT

World Series and Multiple Australian championship Winning Stinger Hull

Specification

World Series and Multiple Australian championship Winning Stinger Hull

Finished second in Australia in 2013, 2014 & 2015.

One of the easiest boats to drive, never finished outside top 6.

In the right hands with the right engine, will spend most of its time in the top 3.

8.5″ Scott Jet with spare blades

Exhaust and engine mounts to suit small block chevy – Group A

Everything needed to race (engine mounts, reverse starter, spare starter etc) Just bolt in an engine and go racing.

Aluminium trailer

Full tow cover

Can assist in setup and help at first few rounds, or 2018 worlds if needed.

$22,000 AUD Negotiable

Also able to supply some sbc parts at right price.

New msd pro mag and 2 x boc’s

Fuel pump etc.

I work shirt work so please text 0420 777 173 for more info, and I’ll get back to you ASAP

 

   $22,000

  Damian O'Leary

  26th September 2018

For Sale - Trouble Maker

FOR SALE

Trouble Maker

Boat Specification

HULL: Stealth.
ENGINE: 400 chev
HORSEPOWER: 600+ bhp
JET UNIT: Scott 8.5″

Complete with trailer, and chrome-moly roll cage, 5-point harness

Boat is a podium winning boat in the Group A 400 Class. #2 Group A 2016

Location QLD

 

   $45,000 Complete - Race Ready

  Brooke

  1st January 2019

For Sale - Custom Transporter

FOR SALE

Custom Transporter

Specification

Toy hauler will suit a boat, bikes, car or karts- large open flat deck with multiple tie downs all round. 4 Queen size double bedrooms, toilet, shower and hand basin.

Full separate kitchen with double sink, double display fridge, hot n cold water, 2 x fresh n grey water tanks with gauges and pumps.

Full size exterior BBQ and you guessed it 3 KEGS ON TAP. You want a team base this is it- custom built one and only we won’t be building another.

 

 

   $100,000 FIRM (Replacement Cost $160K)

  Brad Marsden

  15th April 2018

For Sale - Alloy 460 Motor

FOR SALE

Alloy 460 Motor

Specification

Engine: Alloy 460 motor (not together) inc Exhaust and Stainless Steel Burns mufflers

 

 

   $22,500 (Make an Offer)

  Brad Marsden

  15th April 2018

For Sale - Carbon Fibre Seats

FOR SALE

Carbon Fibre Seats

Specification

SEATS: Lay back carbon fiber seats x2 $1,500 each upholstered in carbon look marine leather

 

   $1,500 each incl upholstery

  Brad Marsden

  15th April 2018

For Sale - Custom Airflow Jetsprint Hull

FOR SALE

Custom Airflow Jetsprint Hull

Specification

HULL: Custom Airflow Jetsprint Hull (Brad special) – Same as Devo Racing hull shown in picture.

Includes chrome molly roll cage, new panel (loose)

 

   $10,500 (Make an offer)

  Brad Marsden

  15th April 2018

For Sale - Ramsay Rebel Ski Boat

FOR SALE

Ramsay Rebel Ski Boat

Specification

HULL: Ramsay Rebel Ski Boat 1980 ish

New upholstery, new carpet, new paint, fresh chev 308 (no carby) new prop and prop shaft

 

   $12,500 (Reduced from $16,000)

  Brad Marsden

  15th April 2018

SOLD - Scott 8.5″ Jetunit

SOLD OUT

Scott 8.5" Jetunit

Specification

JET UNIT: Scott 8.5″ including Grill, one set of blades, new set of bearings and seals

 

   $5,200

  Brad Marsden

  15th April 2018